Advanced Surface Polishing Techniques Open access Peer reviewed

Mechanistic insight into face-dependent oxidation of 6H-SiC in Fenton-based chemically enhanced lapping

Xuliang Li, Yan Wang, Md Al-Amin, Lisbeth Grøndahl and 2 more

Surfaces and Interfaces | Nov 1, 2026

Abstract

Abstract

Silicon carbide (SiC) is essential for next-generation power electronics, yet its extreme hardness and chemical inertness make wafer machining challenging. In this study, Fenton-based slurries containing Fe₃O₄ catalyst were developed for chemically enhanced lapping (CEL) of 6H-SiC, and the material removal mechanisms of the Si- and C-faces were investigated. The incorporation of Fe₃O₄ significantly improved the lapping performance of both Si- and C-faces compared with an H₂O₂-based slurry, with optimum performance at 1.0 wt% Fe₃O₄. The MRR increased by 90% and 157% for the Si- and C-faces respectively. Distinct oxidation pathways were observed: on the Si-face, Fenton chemistry promoted the formation of a thin silicon oxide layer that passivated the surface and was subsequently removed by abrasion. In contrast, the C-face underwent extensive carbon oxidation and reorganisation, producing an oxygenated carbon-rich surface layer that was more easily removed. The combined effects of carbon-layer removal and silicon dissolution accounted for the higher MRR of the C-face. The existence of an optimum Fe 3 O 4 concentration suggested that that the available Fe 3 O 4 surface area plays a key role in heterogeneous H 2 O 2 activation and •OH generation. This work demonstrates that Fenton chemistry enhances SiC lapping through polarity-dependent oxidation and material removal mechanisms, providing insights for designing high-efficiency wafer lapping processes.

Direct answer

What can I do from this paper page?

Use this page to scan "Mechanistic insight into face-dependent oxidation of 6H-SiC in Fenton-based chemically enhanced lapping" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Advanced Surface Polishing Techniques research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Xuliang Li

first | The University of Queensland

Yan Wang

middle | The University of Queensland

Md Al-Amin

middle | The University of Queensland | ORCID 0000-0001-5242-3193

Lisbeth Grøndahl

middle | The University of Queensland | ORCID 0000-0001-6012-9808

Han Huang

middle | Sun Yat-sen University

Mingyuan Lu

last | The University of Queensland | ORCID 0000-0002-2854-1939

Research areas

Follow related topics

Citation

BibTeX

@article{Li2026Mechanistic,
  title = {Mechanistic insight into face-dependent oxidation of 6H-SiC in Fenton-based chemically enhanced lapping},
  author = {Xuliang Li and Yan Wang and Md Al-Amin and Lisbeth Grøndahl and Han Huang and Mingyuan Lu},
  journal = {Surfaces and Interfaces},
  year = {2026},
  doi = {10.1016/j.surfin.2026.111195},
  url = {https://doi.org/10.1016/j.surfin.2026.111195}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Advanced Surface Polishing Techniques research papers?

Follow Advanced Surface Polishing Techniques research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Mechanistic insight into face-dependent oxidation of 6H-SiC in Fenton-based chemically enhanced lapping. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app