Abstract
Abstract
ABSTRACT This study comparatively investigates the solid particle erosion behavior of cast and laser powder bed fusion (LPBF)‐manufactured AlSi10Mg alloys under room‐temperature and cryogenic conditions, including the effect of T6 heat treatment. Erosion tests were conducted according to ASTM G76 using SiC particles (∼350 µm) at 3 bar and six impact angles (15°–90°). For cryogenic tests, specimens were immersed in liquid nitrogen, and erosion experiments were completed, whereas the surface temperature remained below −100°C. Erosion performance was quantified by weight loss, whereas damage mechanisms were characterized using scanning electron microscopy (SEM) and three‐dimensional surface topography. Discrete element method (DEM) simulations were additionally performed to examine particle impact behavior. The results demonstrated a strong dependence of erosion rate on impact angle. LPBF‐manufactured specimens generally exhibited higher erosion resistance than their cast counterparts, whereas the influence of T6 heat treatment depended on the manufacturing route. Conversely, cryogenic conditions generally increased material loss. Surface analyses showed predominantly ductile erosion mechanisms, characterized by cutting, plowing, lip, and crater formation, and localized plastic deformation, with no extensive brittle fracture. These findings demonstrate the combined effects of manufacturing route, heat treatment, and cryogenic exposure on the erosion response of AlSi10Mg.
Direct answer
What can I do from this paper page?
Use this page to scan "Investigation of Solid Particle Erosion Wear Behavior of Additively Manufactured AlSi10Mg Alloys Under Cryogenic Conditions" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Aydin2026Investigation,
title = {Investigation of Solid Particle Erosion Wear Behavior of Additively Manufactured AlSi10Mg Alloys Under Cryogenic Conditions},
author = {Mehmet Esat Aydin and Mehmet Bağcı},
journal = {Journal of Tribology},
year = {2026},
doi = {10.1002/jtrb.70012},
url = {https://doi.org/10.1002/jtrb.70012}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Erosion and Abrasive Machining research papers?
Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Investigation of Solid Particle Erosion Wear Behavior of Additively Manufactured AlSi10Mg Alloys Under Cryogenic Conditions. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app