Arduino and IoT Applications Open access Peer reviewed

A Low-Cost Smart Laboratory Monitoring System Using IoT Sensors and MQTT Communication with Digital Twin-Oriented Visualization

Yavuz Selim Kızılgül, Onur Mert Çakıcı, Baykal Sarioglu

Black Sea Journal of Engineering and Science | Nov 15, 2026

Scollr summary

What this paper is about

Overall, the proposed system demonstrates a modular, affordable, and camera-free framework for smart laboratory monitoring and provides a scalable foundation for future digital twin-oriented and energy-aware control applications.

Full abstract

Read the full abstract

Smart laboratory monitoring requires continuous observation of indoor environmental conditions and space usage while maintaining user privacy and using an affordable sensing infrastructure. Conventional indoor monitoring systems may present environmental data through separate or limited visualization interfaces, while camera-based occupancy monitoring can introduce privacy concerns in laboratory and educational environments. To address these limitations, this study presents a low-cost and privacy-conscious smart laboratory monitoring system that combines IoT-based environmental sensing, MQTT communication, machine learning analysis, occupancy monitoring, and an Omniverse-based visualization layer. The proposed system uses an ESP32 development board as the edge-processing unit and integrates an SHT31 temperature and humidity sensor, an LDR light sensor, a magnetic door sensor, and dual VL53L0X Time-of-Flight sensors for entry/exit observation. The collected data were transmitted through a HiveMQ MQTT Broker and processed for environmental forecasting, light-state classification, anomaly detection, occupancy analysis, and digital twin-oriented visualization. During the monitoring period, 45,091 timestamped records were collected between 2026-05-21 and 2026-06-03, and 42,110 model-ready samples were used after feature generation and preprocessing. Multi-horizon forecasting produced high short-term R² values for temperature and relative humidity, although a persistence-based naive baseline remained a strong reference. Light-state classification was evaluated using Logistic Regression, Decision Tree, and K-NN models, with Logistic Regression achieving the highest F1-score of 0.849. Using the predefined upper 0.5% anomaly-score threshold, 211 records were flagged as unusual. Occupancy-related analysis showed that laboratory activity was limited and mainly concentrated on weekday daytime hours; the Random Forest occupancy-profile model achieved a lower MAE than the naive global-mean baseline, although instantaneous prediction performance remained limited. The Omniverse environment was implemented as an interface-level monitoring and visualization layer, while the smart switch pathway was retained as a prototype-level extension for future physical validation. Overall, the proposed system demonstrates a modular, affordable, and camera-free framework for smart laboratory monitoring and provides a scalable foundation for future digital twin-oriented and energy-aware control applications.

Direct answer

What can I do from this paper page?

Use this page to scan "A Low-Cost Smart Laboratory Monitoring System Using IoT Sensors and MQTT Communication with Digital Twin-Oriented Visualization" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Arduino and IoT Applications research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Yavuz Selim Kızılgül

first | Istanbul Bilgi University | ORCID 0009-0009-1116-0484

Onur Mert Çakıcı

middle | Istanbul Bilgi University | ORCID 0009-0004-3172-1924

Baykal Sarioglu

last | Istanbul Bilgi University | ORCID 0000-0002-7433-3823

Research areas

Follow related topics

Citation

BibTeX

@article{Kzlgl2026Cost,
  title = {A Low-Cost Smart Laboratory Monitoring System Using IoT Sensors and MQTT Communication with Digital Twin-Oriented Visualization},
  author = {Yavuz Selim Kızılgül and Onur Mert Çakıcı and Baykal Sarioglu},
  journal = {Black Sea Journal of Engineering and Science},
  year = {2026},
  doi = {10.34248/bsengineering.1969160},
  url = {https://doi.org/10.34248/bsengineering.1969160}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Arduino and IoT Applications research papers?

Follow Arduino and IoT Applications research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for A Low-Cost Smart Laboratory Monitoring System Using IoT Sensors and MQTT Communication with Digital Twin-Oriented Visualization. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app