Erosion and Abrasive Machining Open access Peer reviewed

Particle dynamics and wall erosion in slurry tee-junctions

Cristian Mauricio Potosi Rosero, DAYANNE MARTINS DA SILVA, Daniel Alves da Silva, João Frederico Haas Leandro Monteiro and 2 more

Wear | Nov 6, 2026

Abstract

Abstract

This work studies the flow properties of dense slurries in a square T-junction. The flow conditions are such as to expect four-way particle coupling. The emphasisis on establishing cause and effect on particle dynamics and wear patterns. Particle Tracking Velocimetry (PTV) is used to follow individual particle trajectories and impact behaviors. The continuous field is characterized through Particle Image Velocimetry (PIV). A closed-loop experimental setup is employed,featuring an acrylic test section for optical flow visualization. Erosion patternis assessed through damage provoked on aluminum plates. The working fluid is a mixture of water and silicon carbide particles. The mass fractions range from 5.0x10^4 to 1.2x10^2. The PTV data determine the individual paths, velocities, impact and rebound angles, and the local concentration of particles. The PTV data are also considered to estimate the number of particle collisions per area per unit time. Erosion effects are analyzed on the bottom (B) impinging wall of the T-junction and on the side (S) wall. Different erosion mechanisms are discussed. The erosion ratio is shown to decrease at high particle concentrations due to intensive particle-particle interactions as a result of reduced impact energy.

Direct answer

What can I do from this paper page?

Use this page to scan "Particle dynamics and wall erosion in slurry tee-junctions" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Cristian Mauricio Potosi Rosero

first | Universidade Federal do Rio de Janeiro | ORCID 0000-0003-0722-8596

DAYANNE MARTINS DA SILVA

middle | Universidade Federal do Rio de Janeiro

Daniel Alves da Silva

middle | Universidade Federal do Rio de Janeiro | ORCID 0000-0003-1596-1456

João Frederico Haas Leandro Monteiro

middle | Universidade Federal do Rio de Janeiro | ORCID 0000-0002-5280-0478

Juliana Loureiro

middle | Universidade Federal do Rio de Janeiro | ORCID 0000-0003-2078-5434

A. P. Silva

last | Universidade Federal do Rio de Janeiro

Research areas

Follow related topics

Citation

BibTeX

@article{Rosero2026Particle,
  title = {Particle dynamics and wall erosion in slurry tee-junctions},
  author = {Cristian Mauricio Potosi Rosero and DAYANNE MARTINS DA SILVA and Daniel Alves da Silva and João Frederico Haas Leandro Monteiro and Juliana Loureiro and A. P. Silva},
  journal = {Wear},
  year = {2026},
  doi = {10.1016/j.wear.2026.207138},
  url = {https://doi.org/10.1016/j.wear.2026.207138}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Erosion and Abrasive Machining research papers?

Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Particle dynamics and wall erosion in slurry tee-junctions. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app