Metallurgical Processes and Thermodynamics Peer reviewed

Structural evolution and heat transfer mechanisms of fluorine-containing and fluorine-free mold flux films for high-Ti steels

Zhide Wang, 韩毅华, Zhanlong Piao, Jiahao Wang and 5 more

Ironmaking & Steelmaking Processes Products and Applications | Oct 21, 2026

Abstract

Abstract

This study investigates the effects of CaF 2 and TiO 2 on slag-film evolution and heat-transfer behavior in CaO–Al 2 O 3 -based mold fluxes designed for high-titanium steel continuous casting. Heat-flux measurements, slag-film characterization, and molecular dynamics (MD) simulations were combined to systematically evaluate the evolution of heat flux, slag-film thickness, surface roughness, porosity, and melt structure. Fluorine-containing fluxes (5 and 10 wt-% CaF 2 ) and fluorine-free Ti-containing fluxes (4 and 8 wt-% TiO 2 ) were selected as representative systems to establish the relationships among melt structure, slag-film characteristics, and heat-transfer performance. Among the investigated compositions, the steady-state heat flux ranged from 0.539 to 0.668 MW m −2 . Compared with the fluorine-containing mold fluxes, the fluorine-free Ti-containing mold fluxes exhibited lower steady-state heat fluxes, indicating superior heat-transfer control during the later stages of solidification. Concurrently, the slag film thickens, and the crystalline phase evolves from competitive multiphase precipitation to a perovskite (CaTiO 3 ) dominated regime. Consequently, surface roughness increases from 14.32 to 19.62 µm, while apparent and true porosities rise from 1.63 to 1.85 vol.-% and 3.82 to 5.32 vol.-%, respectively. MD simulations revealed that increasing F content decreased the proportion of Al IV species while increasing that of Al III species, as F progressively substituted for O to form [AlO 3 F] 4− structural units. Upon replacing CaF 2 with TiO 2 , the coordination numbers of Al–O and Ti–O increased, leading to a more complex melt network structure and a lower heat-transfer capability of the liquid slag. Consequently, the fluorine-free Ti-containing mold flux exhibited a stronger ability to regulate heat transfer than its fluorine-containing counterpart, which is in good agreement with the heat-flux measurements. By systematically elucidating the evolution of slag-film structure and the associated heat-transfer mechanisms in both fluorine-containing and fluorine-free mold fluxes, this study provides fundamental insights and theoretical guidance for the development of fluorine-free mold fluxes for the continuous casting of high-titanium steels.

Direct answer

What can I do from this paper page?

Use this page to scan "Structural evolution and heat transfer mechanisms of fluorine-containing and fluorine-free mold flux films for high-Ti steels" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Metallurgical Processes and Thermodynamics research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Zhide Wang

first | North China University of Science and Technology

韩毅华

middle | North China University of Science and Technology

Zhanlong Piao

middle | North China University of Science and Technology | ORCID 0009-0008-5226-4530

Jiahao Wang

middle | North China University of Science and Technology | ORCID 0009-0008-6878-3597

Caijun Zhang

middle | North China University of Science and Technology

Xingjuan Wang

middle | North China University of Science and Technology | ORCID 0009-0006-7652-040X

Pengcheng Xiao

middle | North China University of Science and Technology | ORCID 0000-0001-9553-7393

Liguang Zhu

middle | North China University of Science and Technology

Yuanzhi Tian

last | North China University of Science and Technology

Research areas

Follow related topics

Citation

BibTeX

@article{Wang2026Structural,
  title = {Structural evolution and heat transfer mechanisms of fluorine-containing and fluorine-free mold flux films for high-Ti steels},
  author = {Zhide Wang and 韩毅华 and Zhanlong Piao and Jiahao Wang and Caijun Zhang and Xingjuan Wang and Pengcheng Xiao and Liguang Zhu and Yuanzhi Tian},
  journal = {Ironmaking & Steelmaking Processes Products and Applications},
  year = {2026},
  doi = {10.1177/03019233261494007},
  url = {https://doi.org/10.1177/03019233261494007}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Metallurgical Processes and Thermodynamics research papers?

Follow Metallurgical Processes and Thermodynamics research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Structural evolution and heat transfer mechanisms of fluorine-containing and fluorine-free mold flux films for high-Ti steels. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app