Abstract
Abstract
Geological storage of CO 2 in deep saline aquifers relies critically on capillary trapping to immobilize buoyant CO 2 and limit post-injection migration. Despite extensive pore-scale studies, the combined influence of wettability and capillary number on residual CO 2 trapping after a complete drainage–imbibition sequence remains insufficiently resolved. Here, systematic pore-scale experiments were conducted to isolate the coupled effects of wettability and injection rate on CO 2 invasion dynamics, connectivity, and ultimate capillary trapping. Three wettability states were imposed via vinyltrimethoxysilane surface modification, yielding contact angles of approximately 20° (strongly water-wet), 47° (moderately water-wet), and 80° (weakly water-wet). CO 2 –water displacement experiments were performed at injection rates from 1 to 12 mL min⁻ 1 , corresponding to capillary numbers of 6.43 × 10⁻ 6 to 7.72 × 10⁻ 5 , spanning capillary-dominated to viscous-influenced flow regimes. High-resolution optical imaging and quantitative image analysis were used to measure residual CO 2 saturation and classify trapped-phase morphology into channels, clusters, and snap-off ganglia. At low capillary numbers (1 mL min⁻ 1 ), residual trapping was dominated by large clusters, with trapped saturations of ∼30–31% across all wettability states. Increasing the capillary number to high injection rates (12 mL min⁻ 1 ) caused a sharp reduction in residual trapping for strongly and moderately water-wet systems, decreasing to 4.85% and 3.94%, respectively, an 84–86% reduction relative to low-rate conditions. In contrast, weakly water-wet systems retained 10.40% residual CO 2 , approximately 2.5 times higher than water-wet cases, primarily as compact clusters stabilized by reduced water-film continuity. These results demonstrate that trapping efficiency alone does not determine storage security; instead, pore-scale connectivity and spatial organization of trapped CO 2 govern long-term stability.
Direct answer
What can I do from this paper page?
Use this page to scan "Wettability and flow-rate controls on pore-scale CO2 capillary trapping in micromodels for geological storage" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow CO2 Sequestration and Geologic Interactions research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Zhandildina2026Wettability,
title = {Wettability and flow-rate controls on pore-scale CO2 capillary trapping in micromodels for geological storage},
author = {Marzhan Zhandildina and Peyman Pourafshary and Masoud Riazi and Fatemeh Kazemi and Reza Khoramian},
journal = {Energy Reports},
year = {2026},
doi = {10.1016/j.egyr.2026.109499},
url = {https://doi.org/10.1016/j.egyr.2026.109499}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new CO2 Sequestration and Geologic Interactions research papers?
Follow CO2 Sequestration and Geologic Interactions research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Wettability and flow-rate controls on pore-scale CO2 capillary trapping in micromodels for geological storage. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app