Abstract
Abstract
Solar chimney power plants are constrained by the maximum chimney height that can be constructed, while mountainous terrain provides additional vertical elevation without increasing the structural tower height. Using twelve months of measured hourly meteorological data from Abha, Saudi Arabia, this study develops a quasi-steady, one-dimensional thermo-hydraulic model of an inclined solar chimney plant that incorporates dry-adiabatic cooling in both the collector and chimney. For a 21.4 km² collector installed on an idealized 12.95° slope with a 1000 m chimney, the predicted annual energy generation is approximately 350 GWh. Neglecting adiabatic cooling leads to an overestimation of annual energy by 37–81%. The model predicts an equivalent flat-ground chimney height of 0.71–0.79 times the terrain elevation gain, although these values may represent upper-bound estimates, as a published CFD study suggests a lower range of 0.32–0.65. Under actual terrain conditions, highly rugged and dissected mountainous areas may restrict the installation of a ground-following solar collector, reducing the estimated annual energy generation to 260–290 GWh. The predicted system performance is primarily influenced by turbine loading, optical efficiency, and the atmospheric temperature lapse rate. The flat-ground formulation predicts a power output of 40–63 kW for the Manzanares prototype, encompassing its reported nominal output of 50 kW without parameter calibration. However, the large-scale inclined configuration remains a model-based prediction that requires experimental validation.
Direct answer
What can I do from this paper page?
Use this page to scan "Thermo-Hydraulic Assessment of a Mountain-Slope Solar Chimney Power Plant with Adiabatic Cooling: Hourly Simulation for Abha, Saudi Arabia" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Solar Energy Systems and Technologies research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Alshahrani2026Thermo,
title = {Thermo-Hydraulic Assessment of a Mountain-Slope Solar Chimney Power Plant with Adiabatic Cooling: Hourly Simulation for Abha, Saudi Arabia},
author = {Saad Alshahrani},
journal = {Preprints.org},
year = {2026},
doi = {10.20944/preprints202611.1146.v1},
url = {https://doi.org/10.20944/preprints202611.1146.v1}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Solar Energy Systems and Technologies research papers?
Follow Solar Energy Systems and Technologies research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Thermo-Hydraulic Assessment of a Mountain-Slope Solar Chimney Power Plant with Adiabatic Cooling: Hourly Simulation for Abha, Saudi Arabia. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app