Abstract
Abstract
Abstract This study investigates the influence of machining environment—atmospheric versus submerged—on the performance of Abrasive Water Jet Machining (AWJM) of Nimonic-90, focusing on depth of penetration (DOP) and surface quality. Experiments were conducted using a Taguchi L27 design considering water pressure (WP), traverse speed (TS), abrasive flow rate (AFR), and stand-off distance (SOD) as control parameters. Atmospheric machining achieved a maximum DOP of $$37.46 \pm 3.01$$ mm at 275 MPa, whereas submerged machining produced smoother surfaces ( $$R_a = 1.91$$ – $$4.45\,\upmu $$ m) due to the damping effect of the surrounding water medium. TS was identified as the most influential parameter ( $$\Delta = 6.36$$ ), with an increase from 50 to 150 mm/min reducing DOP by approximately 54.6%. The optimal parameter combination for maximum DOP was WP = 275 MPa, TS = 50 mm/min, AFR = 300 g/min, and SOD = 2 mm. The Hybrid Cohort Intelligence (HCI) model incorporating polynomial regression demonstrated strong predictive capability, achieving $$R^{2} = 0.9812$$ and MSE = 1.106 for AWJM, and $$R^{2} = 0.9900$$ and MSE = 0.520 for Submerged Abrasive Water Jet Machining (SAWJM). Overall, atmospheric AWJM is suitable for higher material removal, while SAWJM provides superior surface integrity, offering a useful framework for process optimisation of Nimonic-90 within the investigated parameter range.
Direct answer
What can I do from this paper page?
Use this page to scan "Depth of penetration prediction in atmospheric and submerged abrasive water jet machining of Nimonic-90 using hybrid cohort intelligence modelling" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{G2026Depth,
title = {Depth of penetration prediction in atmospheric and submerged abrasive water jet machining of Nimonic-90 using hybrid cohort intelligence modelling},
author = {Dilip Maruthi G and Sudhakar C. Jambagi},
journal = {Scientific Reports},
year = {2026},
doi = {10.1038/s41598-026-79577-w},
url = {https://doi.org/10.1038/s41598-026-79577-w}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Erosion and Abrasive Machining research papers?
Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Depth of penetration prediction in atmospheric and submerged abrasive water jet machining of Nimonic-90 using hybrid cohort intelligence modelling. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app