Erosion and Abrasive Machining Open access Peer reviewed

Improving the slurry erosion resistance of multiphase ZrB2-based coated pipe fabricated by centrifugal self-propagating high-temperature synthesis

Nachimuthu Radhika, M. Ramu, M. Sabarinathan, Akash Achanti and 2 more

Discover Materials | Nov 3, 2026

Abstract

Abstract

Ceramic coatings extend the lifespan of steel pipes used in hydroelectric power plants and mining industries by reducing erosion damage. This work employed the centrifugal self-propagating high-temperature synthesis approach to produce a ZrB 2 coating on the internal surface of the pipes. The as-coated samples were annealed for 2 to 6 h at 750 °C to improve the erosion resistance and microhardness. The microstructural analysis confirmed that a multiphase ZrB 2 -based coating was deposited, with minor cracks and pores, and that these were reduced after annealing. The sample treated at 750 °C for 4 h exhibited the maximum hardness of 1189.98 HV, showing improvements of 4.72 times over the substrate and 1.23 times over the as-coated sample. In addition, the slurry erosion test results showed that the annealed sample, which had the highest microhardness, exhibited superior erosion resistance across all test conditions compared to the as-coated and uncoated samples. Among the tested parameters, impact velocity (10–40 m/s) had the most pronounced effect on erosion rate, with erosion increasing substantially as impact velocity increased. These results showed that annealing significantly improved the microhardness and erosion behaviour of the ceramic-coated steel.

Direct answer

What can I do from this paper page?

Use this page to scan "Improving the slurry erosion resistance of multiphase ZrB2-based coated pipe fabricated by centrifugal self-propagating high-temperature synthesis" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Nachimuthu Radhika

first | Amrita Vishwa Vidyapeetham | ORCID 0000-0001-5138-2318

M. Ramu

middle | Amrita Vishwa Vidyapeetham

M. Sabarinathan

middle | Amrita Vishwa Vidyapeetham

Akash Achanti

middle | Amrita Vishwa Vidyapeetham

C. Tanishkar

middle | Amrita Vishwa Vidyapeetham

Mathiyazhagan Sathishkumar

last | Amrita Vishwa Vidyapeetham | ORCID 0000-0003-0726-8731

Research areas

Follow related topics

Citation

BibTeX

@article{Radhika2026Improving,
  title = {Improving the slurry erosion resistance of multiphase ZrB2-based coated pipe fabricated by centrifugal self-propagating high-temperature synthesis},
  author = {Nachimuthu Radhika and M. Ramu and M. Sabarinathan and Akash Achanti and C. Tanishkar and Mathiyazhagan Sathishkumar},
  journal = {Discover Materials},
  year = {2026},
  doi = {10.1007/s43939-026-01045-z},
  url = {https://doi.org/10.1007/s43939-026-01045-z}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Erosion and Abrasive Machining research papers?

Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Improving the slurry erosion resistance of multiphase ZrB2-based coated pipe fabricated by centrifugal self-propagating high-temperature synthesis. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app