Erosion and Abrasive Machining Open access Peer reviewed

Response surface optimization and ANFIS Prediction of abrasive waterjet machining in areca nut biofiller epoxy composites

Palanivendhan Murugadoss, P. Vasanthkumar, Natarajan Senthilkumar, Deepanraj Balakrishnan and 1 more

Scientific Reports | Oct 31, 2026

Abstract

Abstract

Abstract Abrasive waterjet machining (AWJM) of epoxy-10 wt.% areca nut biofiller composite was investigated using a face-centred central composite design in response surface methodology (RSM). Waterjet pressure (WJP), traverse speed (TS), abrasive flow rate (AFR), and stand-off distance (SoD) were varied to assess surface roughness (SR) and kerf angle (KA). Measured SR and KA ranged from 3.55 to 5.43 µm and 3.08 to 4.42°. Analysis of variance identified SoD as the dominant factor for both responses. Backward elimination improved the RSM predicted R 2 from 0.8287 to 0.8553 (SR) and from 0.8954 to 0.9307 (KA). In the six-observation comparison, ANFIS achieved lower RMSE values (0.0313 µm and 0.0298°) than the backward-eliminated RSM models (0.0469 µm and 0.0462°) for SR and KA. ANFIS exhibited the lowest RMSE across all 30 observations (0.0859 µm and 0.0379°). Full-RSM desirability optimization identified 300 MPa WJP, 200 mm/min TS, 150 g/min AFR, and 1.5 mm SoD as the optimal conditions, with a desirability of 0.95. Confirmation experiments yielded 3.48 µm (SR) and 3.11° (KA), with prediction deviations of 3.53% and 2.81%. SEM observations revealed finer cutting tracks and fewer surface defects under optimized conditions. These findings highlight the complementary modelling capabilities of RSM and ANFIS for AWJM of biofiller-reinforced sustainable epoxy composites.

Direct answer

What can I do from this paper page?

Use this page to scan "Response surface optimization and ANFIS Prediction of abrasive waterjet machining in areca nut biofiller epoxy composites" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Palanivendhan Murugadoss

first | SRM Institute of Science and Technology | ORCID 0000-0003-0388-1547

P. Vasanthkumar

middle | SRM Institute of Science and Technology | ORCID 0000-0002-5812-428X

Natarajan Senthilkumar

middle | Saveetha University | ORCID 0000-0002-2441-1061

Deepanraj Balakrishnan

middle | Prince Mohammad bin Fahd University

Rajiv Selvam

last | Manipal Academy of Higher Education, Dubai | ORCID 0000-0001-8739-7300

Research areas

Follow related topics

Citation

BibTeX

@article{Murugadoss2026Response,
  title = {Response surface optimization and ANFIS Prediction of abrasive waterjet machining in areca nut biofiller epoxy composites},
  author = {Palanivendhan Murugadoss and P. Vasanthkumar and Natarajan Senthilkumar and Deepanraj Balakrishnan and Rajiv Selvam},
  journal = {Scientific Reports},
  year = {2026},
  doi = {10.1038/s41598-026-78440-2},
  url = {https://doi.org/10.1038/s41598-026-78440-2}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Erosion and Abrasive Machining research papers?

Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Response surface optimization and ANFIS Prediction of abrasive waterjet machining in areca nut biofiller epoxy composites. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app