Abstract
Abstract
34CrNiMo6 steel is widely used in heavy-duty transmission components, and improving its bloom surface quality is important for increasing product yield and reducing downstream processing costs. To address transverse corner cracking during continuous casting, mould flux evaluation, optimisation and industrial validation were conducted based on the steel's solidification characteristics, thermophysical properties and casting conditions. Calculations indicated a relatively low risk of peritectic transformation shrinkage, but low thermal conductivity increased corner shell sensitivity to non-uniform cooling and heat-flux fluctuations, demanding continuous liquid slag film lubrication and stable interfacial heat transfer. The existing Flux A exhibited a long melting time and high viscosity, break temperature and crystallisation temperature, resulting in a thin liquid slag layer and a shortened effective lubrication range that contributed to frequent cracking. Following the concept of ‘stable lubrication and controlled heat transfer’, Flux B was developed by reducing basicity, Al 2 O 3 and carbon contents, increasing Na 2 O content and introducing a small amount of Li 2 O. Optimisation reduced the melting temperature from 1185 °C to 1081 °C and the viscosity measured at 1300 °C from 0.59 to 0.36 Pa·s. Shorter melting time and lower break and crystallisation temperatures indicated improved melting and rheological properties and controlled high-temperature crystallisation. A parallel two-strand comparative trial over two consecutive heats showed that replacing Flux A with Flux B increased the liquid slag layer thickness from approximately 5 to 9 mm and mould flux consumption from 0.35 to 0.68 kg·t −1 . The number of transverse corner crack indications detected by magnetic particle inspection in the sampled blooms decreased from 20 to 3, representing a reduction of approximately 85%. These results demonstrate that mould flux optimisation based on steel solidification characteristics and thermophysical properties provides an effective approach to improving the bloom surface quality of Cr–Ni–Mo quenched-and-tempered steels.
Direct answer
What can I do from this paper page?
Use this page to scan "Analysis of transverse corner cracks and mould flux optimisation in the continuous casting of 34CrNiMo6 steel blooms" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Metallurgical Processes and Thermodynamics research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Wang2026Analysis,
title = {Analysis of transverse corner cracks and mould flux optimisation in the continuous casting of 34CrNiMo6 steel blooms},
author = {Xin Wang and Liguang Zhu and Cuiyu Zhou and He Zhang and 韩毅华},
journal = {Ironmaking & Steelmaking Processes Products and Applications},
year = {2026},
doi = {10.1177/03019233261500947},
url = {https://doi.org/10.1177/03019233261500947}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Metallurgical Processes and Thermodynamics research papers?
Follow Metallurgical Processes and Thermodynamics research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Analysis of transverse corner cracks and mould flux optimisation in the continuous casting of 34CrNiMo6 steel blooms. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app