Spacecraft Design and Technology Peer reviewed

Thermal design and experiment validation of the focal plane assembly for a low-orbit Extreme Ultraviolet Solar Telescope

Zhengzheng Kang, Liheng Chen, Yuan Li, Mingkai Zhao

Journal of Thermal Stresses | Nov 6, 2026

Abstract

Abstract

The CCD must be kept at a stable low temperature (−50 °C) to maintain long-term two-dimensional sun-tracking of the Extreme Ultraviolet Solar Telescope. A thermal design and optimization method for the focal plane assembly is proposed to meet its thermal control requirements. The dimensions and tilt angles of the heat dissipation cold plates for both components were optimized using SHAP-guided two-stage sampling and Langevin equation optimization algorithm. This resolved the mutual constraints between the CCD and cold trap heat dissipation and accounted for the effects of temperature transients. The thermal simulation results show that the CCD temperature can be set to −50 °C, while ensuring that the cold trap is maintained at a temperature at least 5 °C lower. The cold plates were 164.1 g lighter after optimization and the CCD heating zone used 9.3% less power. The focal plane assembly’s maximum deviation between simulation and experiment was 4.81 °C. Thermal equilibrium experiment results have demonstrated that the CCD temperature is maintained at −50 °C, while the cold trap temperature is kept at least 5 °C lower than that of the CCD. The experiment data obtained in this study met the telescope’s thermal control specifications, thereby verifying the effectiveness of the thermal design method.

Direct answer

What can I do from this paper page?

Use this page to scan "Thermal design and experiment validation of the focal plane assembly for a low-orbit Extreme Ultraviolet Solar Telescope" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Spacecraft Design and Technology research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Zhengzheng Kang

first | Chinese Academy of Sciences

Liheng Chen

middle | Chinese Academy of Sciences

Yuan Li

middle | Chinese Academy of Sciences

Mingkai Zhao

last | Chinese Academy of Sciences | ORCID 0000-0002-3004-9302

Research areas

Follow related topics

Citation

BibTeX

@article{Kang2026Thermal,
  title = {Thermal design and experiment validation of the focal plane assembly for a low-orbit Extreme Ultraviolet Solar Telescope},
  author = {Zhengzheng Kang and Liheng Chen and Yuan Li and Mingkai Zhao},
  journal = {Journal of Thermal Stresses},
  year = {2026},
  doi = {10.1080/01495739.2026.2756327},
  url = {https://doi.org/10.1080/01495739.2026.2756327}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Spacecraft Design and Technology research papers?

Follow Spacecraft Design and Technology research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Thermal design and experiment validation of the focal plane assembly for a low-orbit Extreme Ultraviolet Solar Telescope. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app