Advanced Surface Polishing Techniques Open access Peer reviewed

Role of polymer additives in an aqueous cerium oxide slurry for the chemical and mechanical polishing of wafers with shallow trench isolation

Elena S. Bokova, D. S. Plotnikov, D. I. Terashkevich, L. I. Zolina and 1 more

Fine Chemical Technologies | Nov 4, 2026

Abstract

Abstract

Objectives. The work set out to investigate the optimal presence of functional additives in an aqueous cerium oxide slurry to ensure the colloidal stability of abrasive particles and predict slurry behavior during the chemical and mechanical polishing of wafers with shallow trench isolation. Methods. The pH of the slurry was measured using a Crison GLP 22 pH meter ( Crison Instruments, S.A., Spain) with a Crison 5201 electrode. Elemental analysis was performed by inductively coupled plasma mass spectrometry (ICP-MS) using a Spectro MS spectrometer ( Shimadzu , Japan). Infrared (IR) spectra were recorded in absorption–reflection mode using a Simex FT-801 Mikran-3 micro-Fourier transform IR spectrometer ( SIMEX , Russia). The IR spectra were analyzed using the NIST, Hummel, and Aldrich databases. Results. The investigated slurry was confirmed to contain two modifiers. The first was partially ionized (no more than 50%) polyacrylic acid using ammonium (NH 4 + ) as the counterion for the COO − groups, while the second represented a mixture of saturated fatty amides having an alkyl substituent length of at least C 15 . A proposed mechanism for the interaction of the modifiers with the cerium oxide particle involves the adsorption of copolymer segments onto the abrasive via electrostatic interaction through COO − groups and the secondary adsorption of the fatty amide onto the polymer-modified abrasive surface. A block diagram was developed for analyzing the interactions between the modifiers and the abrasive, as well as those involving dielectric surfaces having different chemical natures. Cerium oxide is shown to act as a chemical and mechanical agent that effectively removes only the surface layer of silicon oxide. At the same time, the polyacrylic acid–ammonium polyacrylate copolymer provides electrostatic stabilization of the slurry and topographically dependent passivation of SiO 2 . The fatty amide, comprising a cation-active surfactant in the working pH range of the slurry (4.6), is adsorbed onto the surface layer of silicon oxide to reduce surface energy and facilitate the mechanical work of its layer-by-layer removal. Since the silicon nitride surface remains intact due to its negligeable interaction with water, the adsorption of cation-active surfactant molecules on it is likely due to the passivating effect of the polymeric modifier. Conclusions. The obtained results are important for understanding the active mechanisms of polishing compositions used in the chemical and mechanical planarization for wafers with shallow trench isolation, as well as for optimizing the formulations of new slurries used in microelectronic technologies.

Direct answer

What can I do from this paper page?

Use this page to scan "Role of polymer additives in an aqueous cerium oxide slurry for the chemical and mechanical polishing of wafers with shallow trench isolation" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Advanced Surface Polishing Techniques research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Elena S. Bokova

first | A. N. Kosygin Moscow State Textile University | ORCID 0000-0001-7769-9639

D. S. Plotnikov

middle | A. N. Kosygin Moscow State Textile University

D. I. Terashkevich

middle

L. I. Zolina

middle | A. N. Kosygin Moscow State Textile University

N. V. Evsyukova

last | A. N. Kosygin Moscow State Textile University | ORCID 0000-0002-3297-5115

Research areas

Follow related topics

Citation

BibTeX

@article{Bokova2026Role,
  title = {Role of polymer additives in an aqueous cerium oxide slurry for the chemical and mechanical polishing of wafers with shallow trench isolation},
  author = {Elena S. Bokova and D. S. Plotnikov and D. I. Terashkevich and L. I. Zolina and N. V. Evsyukova},
  journal = {Fine Chemical Technologies},
  year = {2026},
  doi = {10.32362/2410-6593-2026-21-5-529-539},
  url = {https://doi.org/10.32362/2410-6593-2026-21-5-529-539}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Advanced Surface Polishing Techniques research papers?

Follow Advanced Surface Polishing Techniques research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Role of polymer additives in an aqueous cerium oxide slurry for the chemical and mechanical polishing of wafers with shallow trench isolation. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app