Abstract
Abstract
Silicon is an essential material for metallurgical and energy applications, yet its conventional carbothermic production is associated with high CO2 emissions. The SisAl process offers a low-emission alternative based on the reduction of SiO2 using aluminium as the reductant, followed by slag refining of the resulting Si–Ca–Al alloy. This study investigates the refining stage using CaO–SiO2-based slags with varying SiO2 contents and slag-to-alloy ratios. Equilibrium simulations and laboratory-scale experiments in an induction furnace were conducted to evaluate the influence of these parameters on the normalized Si concentration in the alloy. Increasing the initial SiO2 content of the slag and the slag-to-alloy ratio generally resulted in higher normalized Si concentrations in the recovered alloy. At 60 wt.% SiO2 and a slag-to-alloy ratio of 5:1, an average normalized silicon content of 97.72 wt.% was achieved, with residual Ca and Al contents of 0.78 and 0.17 wt.%, respectively, while individual experiments exceeded 98 wt.% Si. Phase separation was identified as an additional factor affecting refining performance. The results demonstrate the feasibility of the investigated slag-refining approach and provide suitable process parameters for further development of the SisAl process.
Direct answer
What can I do from this paper page?
Use this page to scan "Experimental and Thermodynamic Investigation of Si–Ca–Al Alloy Slag Refining: Effects of Slag SiO2 Content and Slag-to-Alloy Ratio" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Metallurgical Processes and Thermodynamics research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Sievers2026Experimental,
title = {Experimental and Thermodynamic Investigation of Si–Ca–Al Alloy Slag Refining: Effects of Slag SiO2 Content and Slag-to-Alloy Ratio},
author = {Magnus Sievers and Moritz Templin and Bernd G. Friedrich},
journal = {Metals},
year = {2026},
doi = {10.3390/met16111212},
url = {https://doi.org/10.3390/met16111212}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Metallurgical Processes and Thermodynamics research papers?
Follow Metallurgical Processes and Thermodynamics research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Experimental and Thermodynamic Investigation of Si–Ca–Al Alloy Slag Refining: Effects of Slag SiO2 Content and Slag-to-Alloy Ratio. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app