Abstract
Abstract
This study investigates the multi-response optimization of abrasive water jet machining (AWJM) of lowcarbon steel using grey relational analysis (GRA).A two-level full factorial design supplemented with three centre-point runs was employed, comprising eleven experiments.Water pressure, traverse speed, and stand-off distance were investigated within ranges of 270-310 MPa, 400-600 mm/min, and 3-5 mm, respectively.Material removal rate (MRR) and surface roughness (SR) were selected as performance responses, aiming to maximize MRR and minimize SR.The responses were normalized, and grey relational grades were calculated using equal response weights and a distinguishing coefficient of 0.5.Experiment 4 achieved the highest grey relational grade of 1.000 at 310 MPa, 600 mm/min, and 3 mm, producing the highest observed MRR of 25.57 and the lowest observed SR of 0.72 μm.Analysis of the mean grey relational grades identified A3B1C1, corresponding to 310 MPa, 400 mm/min, and 3 mm, as the preferred combination based on factor-level averages.Thus, A3B1C1 represents the combination selected from marginal means, while Experiment 4 remains the best observed experimental run.
Direct answer
What can I do from this paper page?
Use this page to scan "Multi-Response Optimization of Abrasive Water Jet Machining of Low-Carbon Steel Using Grey Relational Analysis" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Elsiti2026Multi,
title = {Multi-Response Optimization of Abrasive Water Jet Machining of Low-Carbon Steel Using Grey Relational Analysis},
author = {Nagwa Mejid Ibrahim Elsiti and Moneer Fouzi El-skandrany},
journal = {IARJSET},
year = {2026},
doi = {10.17148/iarjset.2026.131148},
url = {https://doi.org/10.17148/iarjset.2026.131148}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Erosion and Abrasive Machining research papers?
Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Multi-Response Optimization of Abrasive Water Jet Machining of Low-Carbon Steel Using Grey Relational Analysis. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app