Erosion and Abrasive Machining Open access

Continuous Improvement of Abrasive Waterjet Cutting Process of Kevlar Fiber-Reinforced Composites: A Systematic DISMO-Based Approach

Adelina-Alina Han, Dinu-Valentin Gubencu

Preprints.org | Oct 21, 2026

Abstract

Abstract

Aligned with Six Sigma principles and continuous improvement, this study applies the structured DISMO methodology, supported by VBA software tools, to identify suitable operating conditions for abrasive waterjet machining (AWJC) of Kevlar fiber composites. Starting from ten machining output parameters evaluating process performance and productivity, rank correlation analysis prioritized the kerf taper angle (ka) and material removal rate (MRR). A screening phase using the random balance method reduced the input factors from six to three key factors: traverse speed (v), focusing tube diameter (D), and abrasive flow rate (q). First-order polynomial empirical models were established to quantify parameter effects. Multi-response optimization using a composite desirability function identified a balanced operating regime (v = 500mm/min, D = 0.76 mm și q = 200 g/min) with a desirability value of Ds = 0.70. This moderate value highlights the inherent trade-off between maximizing material removal rate and minimizing taper angle. Due to its general character, the developed methodological framework can be easily adapted for the analysis and control of other manufacturing processes.

Direct answer

What can I do from this paper page?

Use this page to scan "Continuous Improvement of Abrasive Waterjet Cutting Process of Kevlar Fiber-Reinforced Composites: A Systematic DISMO-Based Approach" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Adelina-Alina Han

first | ORCID 0000-0002-4003-6273

Dinu-Valentin Gubencu

last

Research areas

Follow related topics

Citation

BibTeX

@article{Han2026Continuous,
  title = {Continuous Improvement of Abrasive Waterjet Cutting Process of Kevlar Fiber-Reinforced Composites: A Systematic DISMO-Based Approach},
  author = {Adelina-Alina Han and Dinu-Valentin Gubencu},
  journal = {Preprints.org},
  year = {2026},
  doi = {10.20944/preprints202610.2095.v1},
  url = {https://doi.org/10.20944/preprints202610.2095.v1}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Erosion and Abrasive Machining research papers?

Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Continuous Improvement of Abrasive Waterjet Cutting Process of Kevlar Fiber-Reinforced Composites: A Systematic DISMO-Based Approach. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app