Abstract
Abstract
Abrasive water jet machining (AWJM) of titanium alloys presents significant modelling challenges because the process responses depend on several interacting parameters in ways that simple regression cannot capture reliably. This paper builds a machine learning framework around XGBoost regression combined with SHapley Additive exPlanations (SHAP) to predict material removal rate (MRR), surface roughness (Ra), and kerf width in AWJM of Ti-6Al-2Sn-4Zr-2Mo alloy. An L18 Taguchi orthogonal array was used to generate 18 experimental runs across four parameters water pressure, abrasive flow rate (AFR), traverse speed (TS), and stand-off distance (SOD). Bayesian hyperparameter tuning gave the XGBoost model a cross-validated R 2 of 0.744 and 0.539 for MRR and Ra, respectively, outperforming the baseline models of linear regression and random forest. SHAP analysis revealed that the effects of water pressure and AFR are the most significant for MRR, while the effect of TS is dominant for Ra. All three responses were then plotted in a Pareto space where the trade-offs between the three responses were mapped and the non-dominated combinations of parameters were identified. The results demonstrate that interpretable ensemble learning is a viable approach for improving the parameter selection of advanced titanium alloy machining.
Direct answer
What can I do from this paper page?
Use this page to scan "Explainable machine learning for abrasive water jet machining parameter optimization of Ti-6Al-2Sn-4Zr-2Mo alloy" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Perumal2026Explainable,
title = {Explainable machine learning for abrasive water jet machining parameter optimization of Ti-6Al-2Sn-4Zr-2Mo alloy},
author = {A. Perumal and T. Shalini and Rajaram Prithivirajan and S. Rathnamala and S. Gejendhiran},
journal = {Frontiers in Mechanical Engineering},
year = {2026},
doi = {10.3389/fmech.2026.2007646},
url = {https://doi.org/10.3389/fmech.2026.2007646}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Erosion and Abrasive Machining research papers?
Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Explainable machine learning for abrasive water jet machining parameter optimization of Ti-6Al-2Sn-4Zr-2Mo alloy. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app