Abstract
Abstract
The synthesis of boron nanoparticles (BNPs) at different temperatures using the dual-pulsed laser ablation (DPLA) method was investigated. A Q-switched Nd: YAG laser with dual wavelengths of 532 and 1064 nm was used to ablate a solid boron target. BNP growth with 0.5% Ni and 0.5% Co catalysts was facilitated through a vapor-solid process in a quartz tube furnace under controlled temperature and pressure with flowing argon (Ar). X-ray diffraction (XRD) revealed diffraction features consistent with crystalline boron structures, with several reflections corresponding to α-boron. High-resolution transmission electron microscopy (HRTEM) and field-emission scanning electron microscopy (FESEM) revealed nanoscale particles with temperature-dependent morphology. Image analysis showed mean particle diameters of 6.24, 3.68, and 1.49 nm for BNPs synthesized at 450, 550, and 650 °C, respectively. The corresponding lattice distances were 0.37, 0.35, and 0.33 nm, indicating potential relevance to hydrogen storage applications. Raman spectroscopy revealed characteristic vibrational modes associated with the BNPs. UV–Vis spectroscopy, Tauc analysis, and four-point probe measurements were used to investigate their optical and electrical properties. The optical bandgap increased from 3.72 to 3.80 eV with increasing synthesis temperature, while electrical conductivity increased from 0.198 to 0.249 S cm -1 , with approximately linear current–voltage characteristics. These results demonstrate temperature-dependent structural, optical, and electrical characteristics of the synthesized BNPs and their relevance to semiconductor-related applications. Furthermore, a resistive memory device incorporating the 650 °C BNPs into a PVP matrix exhibited an ON/OFF current ratio of approximately 7 × 10 4 , endurance exceeding 10 4 cycles, and retention of up to 10 6 s. These results demonstrate the feasibility of the synthesized BNPs for nonvolatile resistive memory applications.
Direct answer
What can I do from this paper page?
Use this page to scan "Temperature-controlled synthesis and characterization of boron nanoparticles with semiconducting properties via dual-pulsed laser ablation" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Laser-Ablation Synthesis of Nanoparticles research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Adebisi2026Temperature,
title = {Temperature-controlled synthesis and characterization of boron nanoparticles with semiconducting properties via dual-pulsed laser ablation},
author = {Mufutau A. Adebisi and Pavel Yaroslavovich Tabakov},
journal = {Results in Materials},
year = {2026},
doi = {10.1016/j.rinma.2026.101082},
url = {https://doi.org/10.1016/j.rinma.2026.101082}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Laser-Ablation Synthesis of Nanoparticles research papers?
Follow Laser-Ablation Synthesis of Nanoparticles research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Temperature-controlled synthesis and characterization of boron nanoparticles with semiconducting properties via dual-pulsed laser ablation. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app