Civil and Structural Engineering Research Open access Peer reviewed

Research on Structural Design and Full-Scale Experimental of Polyurethane Elastomer-Based Seamless Expansion Joint for Bridges

Ya Gong, Min Wang, Qingjun Zhong, Binbin Wang and 3 more

KSCE Journal of Civil Engineering | Nov 1, 2026

Abstract

Abstract

In order to address common issues with traditional bridge expansion devices such as susceptibility to damage, high noise, and insufficient durability, a seamless polyurethane elastomer expansion device for highway bridges was designed. The most unfavorable stress state under vehicle loads and the dimensional structure of the polyurethane elastomer were analyzed. The tensile properties, hardness, tear strength, and aging resistance of three groups of polyurethane elastomers were studied. To verify the overall performance, full-scale tests were conducted. Increasing the polyurethane elastomer thickness to 75 mm significantly reduces and stabilizes its tensile stress, Mises stress, and shear stress. When the elastomer width is 650 mm, the Mises stress is minimal and the overall performance is optimal. When the mass ratio of polyurethane prepolymer to the blend of fluorinated graphene oxide and amino-terminated polyether is 90/10, the elongation at break reaches a maximum of 958.2%, with tensile strength around 10 MPa. Tensile-compression tests of full-scale specimens show a linear elastic stress-strain relationship, with maximum stress far below the material strength. In low-cycle and high-cycle fatigue tests, the device's dissipated energy decreased by only 11.7% and 14.5% respectively, and no cracking or delamination was observed after testing, demonstrating excellent fatigue durability.

Direct answer

What can I do from this paper page?

Use this page to scan "Research on Structural Design and Full-Scale Experimental of Polyurethane Elastomer-Based Seamless Expansion Joint for Bridges" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Civil and Structural Engineering Research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Ya Gong

first | Merchants Chongqing Communications Research and Design Institute | ORCID 0000-0002-1850-5416

Min Wang

middle | Merchants Chongqing Communications Research and Design Institute | ORCID 0000-0003-0035-7993

Qingjun Zhong

middle

Binbin Wang

middle | Merchants Chongqing Communications Research and Design Institute

Yu Wang

middle

Pan Liu

middle | Merchants Chongqing Communications Research and Design Institute

Feng Xiong

last | ORCID 0000-0001-6029-0204

Research areas

Follow related topics

Citation

BibTeX

@article{Gong2026Research,
  title = {Research on Structural Design and Full-Scale Experimental of Polyurethane Elastomer-Based Seamless Expansion Joint for Bridges},
  author = {Ya Gong and Min Wang and Qingjun Zhong and Binbin Wang and Yu Wang and Pan Liu and Feng Xiong},
  journal = {KSCE Journal of Civil Engineering},
  year = {2026},
  doi = {10.1016/j.kscej.2026.100783},
  url = {https://doi.org/10.1016/j.kscej.2026.100783}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Civil and Structural Engineering Research papers?

Follow Civil and Structural Engineering Research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Research on Structural Design and Full-Scale Experimental of Polyurethane Elastomer-Based Seamless Expansion Joint for Bridges. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app