Abstract
Abstract
Abstract Radiata pine (Pinus radiata D. Don) is widely used but suffers from resin exudation, low surface hardness, and poor dimensional stability. Conventional modifications rely on a two-step “degreasing and reinforcement” sequence, requiring exogenous chemicals or fixation treatments. This study presents a one-step strategy without additives that integrates surface compression, resin degreasing, and deformation fixation to enhance surface hardness, antiresin exudation property, and dimensional stability. Surface-compressed and fixed (SCF) wood exhibited a 100.0% increase in average density within the compressed layers, a 40–60° improvement in water contact angle (WCA), and a 179.1–193.1% enhancement in surface hardness versus control wood. Prolonged treatment darkened the surface color, reduced set recovery induced by immersion in water to 9.0%, and suppressed resin exudation. Microscopic analysis revealed buckling of tracheid cell walls and a reduction in lumen volume. Chemically, treatment promoted hemicellulose deacetylation and increased the relative crystallinity and crystalline thickness of cellulose by 7.8–61.4 and 8.4–30.2%, respectively. These structural and chemical changes contributed to improved surface properties and dimensional stability. Compared with SCF-2 (2 h treatment), extraction-pretreated SCF-2 (E-SCF-2) showed lower dimensional stability and WCA, but the differences were not significant, indicating that resin deposition and redistribution, which fill cell lumens, contribute positively but not dominantly to water-related properties. The resin content in the lower compressed layer (LCL) was 5.1–19.5% higher than that in the upper compressed layer (UCL), leading to lower surface wettability and a more yellowish appearance on the LCL. This study provides an efficient method for transforming radiata pine into a high-performance material for furniture and flooring applications.
Direct answer
What can I do from this paper page?
Use this page to scan "Additive-Free One-Step Hot Pressing of Radiata Pine for Simultaneous Surface Densification, Resin Exudation Suppression, and Dimensional Stabilization" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Wood Treatment and Properties research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Xiang2026Additive,
title = {Additive-Free One-Step Hot Pressing of Radiata Pine for Simultaneous Surface Densification, Resin Exudation Suppression, and Dimensional Stabilization},
author = {Elin Xiang and Yongdong Zhou},
journal = {ACS Sustainable Chemistry & Engineering},
year = {2026},
doi = {10.1021/acssuschemeng.6c03820},
url = {https://doi.org/10.1021/acssuschemeng.6c03820}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Wood Treatment and Properties research papers?
Follow Wood Treatment and Properties research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for Additive-Free One-Step Hot Pressing of Radiata Pine for Simultaneous Surface Densification, Resin Exudation Suppression, and Dimensional Stabilization. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app