Material Selection and Properties
Open access
Peer reviewed
Abstract
Abstract
This study compares two materials, namely Abrasive Resistant Cast Steel (ARCS), a type of abrasion-resistant cast steel designed for industrial applications exposed to severe abrasive conditions, and SCMnH11, a high-manganese steel commonly used for hammer applications in limestone crushers within the cement industry. The research focuses on analyzing mechanical properties such as tensile strength, yield strength, hardness, as well as the chemical composition and microstructure of both materials. The results show that ARCS exhibits superior tensile and yield strength compared to SCMnH11, with respective values of 923 N/mm² and 756 N/mm², while SCMnH11 demonstrates higher elongation (25%) compared to ARCS (9.5%). In terms of hardness, SCMnH11 is harder (30 HRC) than ARCS (25.6 HRC). Chemical analysis indicates that SCMnH11 has a higher manganese content (9.08%) than ARCS (1.32%), contributing to its toughness, whereas ARCS contains more chromium (2.25%), enhancing its wear resistance. Microstructural analysis reveals that ARCS consists of a combination of bainite and ferrite, providing strength and hardness, while the austenitic structure of SCMnH11 enables it to absorb impact more effectively without damage.
Direct answer
What can I do from this paper page?
Use this page to scan "STUDI PERBANDINGAN SIFAT MEKANIK BAJA ABRASIVE RESISTANT CAST STEEL (ARCS) DAN SCMNH11 UNTUK APLIKASI HAMMER LIMESTONE CRUSHER" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Material Selection and Properties research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{prasetiawan2026STUDI,
title = {STUDI PERBANDINGAN SIFAT MEKANIK BAJA ABRASIVE RESISTANT CAST STEEL (ARCS) DAN SCMNH11 UNTUK APLIKASI HAMMER LIMESTONE CRUSHER},
author = {Franciskus edy prasetiawan and Anggoro Harry Sulistyawan and Nudito Rifqi Himawan},
journal = {Jurnal Teknik Mesin},
year = {2026},
doi = {10.33795/j-meeg.v5i1.9087},
url = {https://doi.org/10.33795/j-meeg.v5i1.9087}
}FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Material Selection and Properties research papers?
Follow Material Selection and Properties research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for STUDI PERBANDINGAN SIFAT MEKANIK BAJA ABRASIVE RESISTANT CAST STEEL (ARCS) DAN SCMNH11 UNTUK APLIKASI HAMMER LIMESTONE CRUSHER. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app