Erosion and Abrasive Machining Peer reviewed

High-Speed Erosion Characteristics and Prediction Model of TC4 Considering SiO₂ Particle Fracture

Xiaojun Yang, Xingyu Luo, Fengwei Hao, Shaosen Shi and 1 more

Tribology Transactions | Nov 13, 2026

Abstract

Abstract

To examine the coupled responses of particle fragmentation and target-material removal during high-speed sand and dust impact, gas–solid erosion tests were conducted on TC4 titanium alloy using SiO₂ particles with a median diameter of 74.06 μm at different impact velocities and angles. The particle-size distribution, change in volume-specific surface area, and target erosion rate were evaluated. At 90°, increasing particle velocity from 100 to 250 m/s increased the target erosion rate by 184.03% and the particle specific-surface-area change by 264.47%. At 175 m/s, target erosion was highest at 15° and lowest at 80°, whereas particle fragmentation was most pronounced near 70°. On the basis of an approximate collision-energy partition and the E/CRC model form, a calibrated semi-empirical erosion-rate correlation was developed with particle specific-surface-area change as an auxiliary fracture descriptor and compared with the Oka model. Target removal and particle refinement exhibited different velocity and angular dependences, suggesting that measured particle-fracture response can complement conventional descriptions of erosion by fragmentable sand particles.

Direct answer

What can I do from this paper page?

Use this page to scan "High-Speed Erosion Characteristics and Prediction Model of TC4 Considering SiO₂ Particle Fracture" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Erosion and Abrasive Machining research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Xiaojun Yang

first | Civil Aviation University of China

Xingyu Luo

middle | Civil Aviation University of China

Fengwei Hao

middle | Civil Aviation University of China

Shaosen Shi

middle | Civil Aviation University of China

Guan Yang

last | Civil Aviation University of China

Research areas

Follow related topics

Citation

BibTeX

@article{Yang2026High,
  title = {High-Speed Erosion Characteristics and Prediction Model of TC4 Considering SiO₂ Particle Fracture},
  author = {Xiaojun Yang and Xingyu Luo and Fengwei Hao and Shaosen Shi and Guan Yang},
  journal = {Tribology Transactions},
  year = {2026},
  doi = {10.1080/10402004.2026.2762704},
  url = {https://doi.org/10.1080/10402004.2026.2762704}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Erosion and Abrasive Machining research papers?

Follow Erosion and Abrasive Machining research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for High-Speed Erosion Characteristics and Prediction Model of TC4 Considering SiO₂ Particle Fracture. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app