Abstract
Abstract
Temperature drift in metering-sensitive components can degrade the accuracy of DC energy metering devices, making PCB temperature stability an important design requirement. This study develops an asymmetric fuzzy gain-scheduled PID controller with Smith prediction for TEC-based PCB temperature regulation. The hardware platform uses an STM32F103C8T6 controller, an SHT30 temperature sensor, and a BTS7960B-based H-bridge TEC driver. The normalized MATLAB model is used only for controller-structure comparison; Fluent-UDF provides a three-dimensional numerical reference for thermal-field regulation; and hardware experiments establish the actual closed-loop response and steady-state accuracy. An effective delay of 1.5 s was estimated from preliminary Fluent transient simulations. To examine the reduced-order plant representation, paired Fluent open-loop cases with identical initial and boundary conditions were differenced to isolate the incremental TEC response. FOPDT fitting yielded a gain magnitude K F = 247.35 °C per normalized duty-ratio unit and an equivalent time constant T F = 176.06 s, with RMSE = 0.0833 °C and R 2 = 0.9933. In matched-parameter ablation with common base gains ( K p , K i , K d ) = (8,1,4), the disturbance peak decreased from 1.349 °C for symmetric fuzzy PID to 1.261 °C after asymmetric regulation and to 1.183 °C for the complete asymmetric fuzzy PID-Smith structure. Under common re-tuning conditions, the proposed structure produced the smallest disturbance peak and the lowest composite objective among the evaluated controllers. Hardware tests at 25, 30, 35, 40 and 45 °C all satisfied the ±0.2 °C steady-state temperature-control requirement.
Direct answer
What can I do from this paper page?
Use this page to scan "High-precision temperature control of DC energy metering device PCB based on an asymmetric fuzzy PID-Smith predictor" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Advanced Sensor and Control Systems research, save the paper, or map adjacent work.
Research areas
Follow related topics
Citation
BibTeX
@article{Duan2026High,
title = {High-precision temperature control of DC energy metering device PCB based on an asymmetric fuzzy PID-Smith predictor},
author = {Xiaomeng Duan and Yubo Yang and Bai Jingfen and Jing Meng and Yongxian Duan},
journal = {Measurement and Control},
year = {2026},
doi = {10.1177/00202940261499132},
url = {https://doi.org/10.1177/00202940261499132}
}
FAQ
Using this paper in a discovery workflow
How do I find related work for this paper?
Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.
How can I keep up with new Advanced Sensor and Control Systems research papers?
Follow Advanced Sensor and Control Systems research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.
Can I cite this paper from this page?
This page includes a static BibTeX block for High-precision temperature control of DC energy metering device PCB based on an asymmetric fuzzy PID-Smith predictor. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.
Follow this research in Scollr
Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.
Get the app