Semiconductor Lasers and Optical Devices Open access Peer reviewed

Self-heating, thermal lensing, and thermal-conductivity co-design of beam performance in small-aperture VCSELs

Joo Hyun Moon, 이중희, Seong Hyuk Lee

Applied Thermal Engineering | Oct 27, 2026

Abstract

Abstract

In small-aperture vertical-cavity surface-emitting lasers for light detection and ranging, self-heating changes divergence and on-axis intensity through a thermo-optic lens. A transient finite-volume electro-thermal solver computes temperature from literature conductivities and the measured current–voltage characteristic. Its calibrated effective substrate depth reproduces the reference junction-temperature rise, giving a thermal resistance of 235 against the reported 237 K W −1 . A beam-propagation mode solver reads that field: for the reference device (radius 30 μm) over 10–95 mA, the guided-mode radius narrows from 16.6 to 8.4 μm and divergence broadens from 13.6 to 26.4 mrad while the beam-propagation ratio remains near unity. Following a constant-current step, divergence reaches 63% of its excursion in about 9 μs and settles by 30 μs. At small apertures, the model agrees with published far-field broadening and effective-optical-aperture contraction in direction, but under-predicts absolute angles by factors of 1.5–2; temperature-normalized slope comparisons remain conditional on device-specific heating rates. A twenty-four-material screening map based on thermo-optic coefficient divided by thermal conductivity identifies high-conductivity routes to lower thermal sensitivity. The contribution is a forward link from a thermally calibrated model to per-mode transient beam budgets without a fitted optical lens. Predicted divergence drift at 3, 6 and 12 μm radii is 17.9, 21.2 and 45.7%, exceeding a 10% budget; halving thermal resistance reduces it by 44–48% and raises on-axis intensity retention from 50 to 70% to 66–82%. These design estimates apply to specified center-hot structures and heat-source assumptions; transient beam measurements remain necessary.

Direct answer

What can I do from this paper page?

Use this page to scan "Self-heating, thermal lensing, and thermal-conductivity co-design of beam performance in small-aperture VCSELs" quickly: start with the summary and abstract, then check the authors, source, topics, and related papers. From here, open Scollr to follow Semiconductor Lasers and Optical Devices research, save the paper, or map adjacent work.

Authors

Researchers on this paper

Joo Hyun Moon

first | Hanbat National University

이중희

middle | Chung-Ang University

Seong Hyuk Lee

last | Chung-Ang University | ORCID 0000-0002-8910-4900

Research areas

Follow related topics

Citation

BibTeX

@article{Moon2026Self,
  title = {Self-heating, thermal lensing, and thermal-conductivity co-design of beam performance in small-aperture VCSELs},
  author = {Joo Hyun Moon and 이중희 and Seong Hyuk Lee},
  journal = {Applied Thermal Engineering},
  year = {2026},
  doi = {10.1016/j.applthermaleng.2026.133751},
  url = {https://doi.org/10.1016/j.applthermaleng.2026.133751}
}

FAQ

Using this paper in a discovery workflow

How do I find related work for this paper?

Use the related papers and topic links on this page as starting points. In Scollr, you can also open the paper and build a literature map around its references, citing papers, and related work.

How can I keep up with new Semiconductor Lasers and Optical Devices research papers?

Follow Semiconductor Lasers and Optical Devices research in Scollr. New papers from the topic flow into a personalized feed, and you can save useful studies to revisit later.

Can I cite this paper from this page?

This page includes a static BibTeX block for Self-heating, thermal lensing, and thermal-conductivity co-design of beam performance in small-aperture VCSELs. Always verify the DOI, source, and publication details against the publisher record before submitting a manuscript.

Follow this research in Scollr

Follow the topics and authors behind this paper, save useful studies, and build a literature map when you are ready to go deeper.

Get the app